How to do a good job of rust-proof linear motor, we all know that the linear motor in the production process is mainly used for high frequency reciprocating motion, it can withstand high load and rated ratio, so it can complete some high-load reciprocating motion, Became the most common drive part in our everyday machines, turning it into a linear motion. The whole process of its work, it is characterized by efficient, sophisticated, repeatable.
There are a lot of advantages to using a linear motor, but we can not ignore some of the problems, right? For example, today we say the linear motor rust problem, which is many of our business problems, then we will talk about this topic.
Today with the Mao Xiaobian explain to you how to do for the linear motor rust:
1.Every time after using the linear motor try to wipe the rust-proof oil, although the workpiece is rubbed rust-proof oil before leaving the factory, but the evaporation and friction and other issues will make the rust-proof oil loses effect, so every time you use After the maintenance is also important.
2. Due to the precision originals, there are many requirements for linear motors in storage. First of all, there must be a uniform shelf, which needs to be preserved in a warm and dry environment. When he needs to save together with other articles, he must take care not to bring dusty or corrosive objects close to it. Because anti-rust oil evaporation in the ground very fast, and the ground is relatively humid, so the linear guide is prohibited from depositing in the ground.
These two points are done, the linear motor rust problem will be much less. However, rust is not enough just to do the operation of the standardization is also necessary, so you can guarantee a longer life of the linear motor, to maintain a longer time accuracy.
This article originates from Kunshan Tongmao Electronics Co., Ltd. (
www.tmmotion.com) original company, please indicate the source.
Linear motor