The use of 3D printing in architecture is nothing new, but in the past, 3D printing technology has been used in most parts of the structure in architectural scenes, but recently, but there is a whole 3d-printed building in Nanjing. 

      The 3d-printed building, a two-storey red-and-blue building located at the Yeongam community health service centre on Xiongzhou Street in Liuhe District, Nanjing, is a demonstration project of our country's key research and development project. Nearly 60 square meters of the two-story building, only 50 hours to print out. And these, can not leave” giant”(height exceeds 6 meters, range of motion reaches 24 meters)3D printer. It can realize intelligent field 3D printing construction of large-scale buildings without secondary assembly, and can greatly reduce the cost of labor and time. This“Giant” printer consists of gantry frame, running track, loading hopper and printing nozzle. In the process of operation, the sprinkler is driven by the track, according to the intelligent program to set the route uniform spraying raw materials, after layer upon layer, forming the whole building. When it comes to 3D printing, it was one of the more revolutionary technologies of the twenty-one th century, and did you know that 3D printing is closely related to linear motors, which have the characteristics of high speed, high accuracy, etc. , a driver is introduced into a 3D printing device as a related component. 

      With more than 10 years of R & D, production and sales, Tongmao linear motor adopts European and n technical standards and processing industry, and is widely used in a variety of automatic equipment. Kunshan Tongmao Electronic Co. . 

       This article was originally published by Kunshan Tongmao Electronics Co. , Ltd. (www.tmmotion.com ) .